Arma 3 Wasteland Mod Installation

This Article will show you how to install A3 Wasteland mod for Arma 3.

How to setup A3 Wasteland

 

Step 1. Go to your Control Panel

Step 2. Click on Mod Manager

Step 3. Click Install on either Altis or Stratis depending on which you would like to install.

Step 4. Go back to the main Control Panel

Step 5. Click Configuration Files

Step 6. Click Configuration Editor on server.cfg

Step 7. Select the A3Wasteland Mission from the Server Mission: dropdown.

Step 8. Click Save

 

 

How to Enable Base Saving

Instructions on how to set it up

Step 1. Inside Configuration Files, click Text Editor on A3Wasteland_settings\main_config.sqf
Step 2. On the 2nd line from the bottom, where it says A3W_baseSaving = 0; change the 0 to a 1 to enable object saving.
Step 3. Click Save
Step 4. Go back to the Mod Manager
Step 5. Click Install on IniDB
Step 6. Go back to the Control Panel
Step 7. Click Commandline Manager
Step 8. Click Select on the Arma3 (Custom Mods) commandline
Step 9. In the -mod= box replace @mod1 with @iniDB
Step 10. Click Apply and restart your server

Congratulations you're all set to go!