Citadel Servers Wiki - User contributions [en]

Uploading your own custom Valheim world file to your server

2021-02-06T11:42:36Z

Alvin singco s: Created page with "Creating the symlink so directory works correctly on your Valheim Game Server Firstly, on the far left, see the icon that says " Create Symlink" Click this and it will creat..."

Creating the symlink so directory works correctly on your Valheim Game Server

Firstly, on the far left, see the icon that says " Create Symlink"

Click this and it will create a symlink to the local user directory ( where Valheim stores it's data )

It will attempt to copy over all files there before it creates the link to your game server directory.

Once this is done, your server is linked, the next step is to upload your world file.

If you have created a world on your local machine, this should be found in: C:\Users\YOUR USER NAME\AppData\LocalLow\IronGate\Valheim

Once there, zip up the contents/compress it in /worlds/

Then, either upload this file via FTP functionality that we provide or upload via the file manager if the file is less than 100MB.

Inside the file manager in the game panel you can then unzip this file.

The data you got from /worlds/ should be uploaded to the directory on your server called /worlds/

[[Category:Valheim]] [[Category:Valheim Game Server Help Articles]]

Setting or changing your Valheim Server Name

2021-02-06T11:40:32Z

Alvin singco s: Created page with "Setting a Server Name on your Valheim Game Server You can set or change the server name on your Valheim game server by firstly accessing the game panel and viewing your serve..."

Setting a Server Name on your Valheim Game Server

You can set or change the server name on your Valheim game server by firstly accessing the game panel and viewing your server.

Once there click/tap on the "Commandline Manager" icon

Once there, click edit on the commandline, you will then see options to define your Password,

Server Name, World Data name ( The file name of the saved world ).

Set/change your server name to what you want, it must be at least 4 Characters long, anything smaller may be very hard to find in the server listings.

it should not have any weird characters either. ( " or ' or , etc )

Also here our video tutorial here:
[[File:Valheim-how-to-configure-the-basic-settings-server-name-password-file-name-etc.mp4|left]]

[[Category:Valheim]] [[Category:Valheim Game Server Help Articles]]

Valheim Game Servers

2021-02-06T11:37:05Z

Alvin singco s: Created page with "{{Gameinfo |image=link=Category:Valheim |developer=Iron Gate AB |publisher=Coffee Stain Publishing |release=February 2nd, 2021 |engine=..."

{{Gameinfo
|image=[[File:Logo valheim.png|200px|link=Category:Valheim]]
|developer=[[Iron Gate AB]]
|publisher=[[Coffee Stain Publishing]]
|release=February 2nd, 2021
|engine=[[VRAGE 2]]
|steam=Yes
|genre=Action, Adventure, Indie, RPG, Early Access
|language=16
|gameserverinfo=[[Valheim Game Servers]]
|website=[http://www.valheimgame.com/]
|wiki=[https://valheim.fandom.com/wiki/Valheim_Wiki Official Wiki]
|gamepage=[https://citadelservers.com/game-servers/valheim-game-hosting Server Rental]
|gameport=2456
|queryport=2457
}}

{{GameServerInfo
|gameinfopage=[[Valheim]]
|dedicatedserversupported=Yes
|dedicatedserverappid=892970
|maxplayers=100
|steamquerysupport=Yes
|setupguidelink=[[How to setup a Valheim dedicated game server Server Guide|Valheim Setup Guide]]
}}

<center>[[File:Logo valheim.png|460px|link=https://citadelservers.com/game-servers/valheim-game-hosting]]<br >
''Rent your own Valheim game server! [https://citadelservers.com/game-servers/valheim-game-hosting citadelservers.com]''
</center>

== Game Server Help ==

<DynamicPageList>
category = Valheim Server Help Articles
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

[[Category:Game servers]]
[[Category:Valheim]]
[[Category:Dedicated Server Support]]

Changing password on your Valheim Game Server

2021-02-06T10:41:55Z

Alvin singco s: Created page with "Setting a password on your Valheim Game Server You can set or change the password on your valheim game server by firstly accessing the game panel and viewing your server. On..."

Setting a password on your Valheim Game Server

You can set or change the password on your valheim game server by firstly accessing the game panel and viewing your server.

Once there click/tap on the "Commandline Manager" icon

Once there, click edit on the commandline, you will then see options to define your Password,

Server Name, World Data name ( The file name of the saved world ).

Set/change your password to what you want, it must be at least 5/6 Characters long, smaller passwords have been found to not let the server start,

it should not have any weird characters either. ( " or ' or , etc )

[[File:Valheim-how-to-configure-the-basic-settings-server-name-password-file-name-etc.mp4|left]]

[[Category:Valheim]] [[Category:Valheim Game Server Help Articles]]

File:Valheim-how-to-configure-the-basic-settings-server-name-password-file-name-etc.mp4

2021-02-06T10:39:10Z

Alvin singco s:

How to set yourself as Admin or others

2021-02-06T10:30:11Z

Alvin singco s: Created page with "Access the Game panel and view your service page Stop your server Go to Configuration Files section and edit the adminlist.txt file via the text editor Add the admin ID's one..."

Access the Game panel and view your service page

Stop your server
Go to Configuration Files section and edit the adminlist.txt file via the text editor
Add the admin ID's one per line
Then Start server

Once you are in-game

Press F5 to open console and type help for all commands

Questions and Answers
How do i get my player ID?
Join your server server
Press F2 key on your keyboard
Under the Players box, you will find the ID in front of the player name

[[Category:Valheim]] [[Category:Valheim Game Server Help Articles]]

Valheim

2021-02-06T10:15:07Z

Alvin singco s: Created page with "{{Gameinfo |image=link=Category:Valheim |developer=Iron Gate AB |publisher=Coffee Stain Publishing |release=February 2nd, 2021 |engine=Unr..."

{{Gameinfo
|image=[[File:Valheim.jpg|200px|link=Category:Valheim]]
|developer=[[Iron Gate AB]]
|publisher=[[Coffee Stain Publishing]]
|release=February 2nd, 2021
|engine=[[Unreal Engine 4]]
|steam=Yes
|genre=Action, Adventure, Indie, RPG, Early Access
|language=16 Languages
|gameserverinfo=[[Valheim Game Servers]]
|website=[http://www.valheimgame.com/ Official Website]
|wiki=[https://valheim.fandom.com/wiki/Valheim_Wiki Official Wiki]
|gamepage=[https://citadelservers.com/game-servers/valheim-game-hosting Server Rental]
|gameport=2456
|queryport=2457
}}
<center>[[File:Logo valheim.png|460px|link=https://citadelservers.com/game-servers/ark-survival-evolved Server]]<br >
''Rent your own Valheim game server! [https://citadelservers.com/game-servers/ark-survival-evolved citadelservers.com]''
</center>

== About This Game ==
A battle-slain warrior, the Valkyries have ferried your soul to Valheim, the tenth Norse world. Besieged by creatures of chaos and ancient enemies of the gods, you are the newest custodian of the primordial purgatory, tasked with slaying Odin’s ancient rivals and bringing order to Valheim.

Your trials begin at the disarmingly peaceful centre of Valheim, but the gods reward the brave and glory awaits. Venture forth through imposing forests and snow-capped mountains, explore and harvest more valuable materials to craft deadlier weapons, sturdier armor, viking strongholds and outposts. Build a mighty longship and sail the great oceans in search of exotic lands … but be wary of sailing too far...

== {{PAGENAME}} Dedicated Game Servers ==
{{PAGENAME}} supports dedicated game servers, you can rent one here from [https://citadelservers.com/game-servers/valheim-game-hosting Citadel Servers] or learn to setup one yourself [[How to setup an {{PAGENAME}} dedicated game server]]. [[{{PAGENAME}} Game Servers]] fully support modding, there are many popular mods available for the game.

== {{PAGENAME}} Game Servers Game server help ==
If you are looking for help with configuring your {{PAGENAME}} server, adding mods, please see [[{{PAGENAME}} Game Servers]] for a list of knowledge base guides on how to resolve common issues, configure your server and apply mods.

==Gallery==
<gallery widths="240" heights="180" mode="nolines">
File:Val1.jpg
File:Val2.jpg
File:Val3.jpg
</gallery>

==Videos==
===Trailer===
[[File:Valheim-early-access-launch-trailer.mp4|Left]]

== More links ==
*[https://citadelservers.com/en-us/game-servers/ark-survival-evolved Server Rental]
*[http://www.playark.com/ Official {{PAGENAME}} Website]

[[Category:Games]]
[[Category:Valheim]]
[[Category:Dedicated Server Support]]

File:Valheim-early-access-launch-trailer.mp4

2021-02-06T10:09:39Z

Alvin singco s:

video

File:Val3.jpg

2021-02-06T10:02:50Z

Alvin singco s:

File:Val2.jpg

2021-02-06T10:02:35Z

Alvin singco s:

File:Val1.jpg

2021-02-06T10:01:36Z

Alvin singco s:

File:Logo valheim.png

2021-02-06T09:53:55Z

Alvin singco s:

header

File:Valheim.jpg

2021-02-06T09:13:54Z

Alvin singco s:

How to add mods in Atlas

2020-12-04T14:21:33Z

Alvin singco s:

<p style="text-align: center;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;"><strong><span style="color: #222222; background-color: #ffffff;">How to Add Mods</span></strong></span></p>
<hr />
<br>
<br>
===== Adding a mod =====
We've made it easier using the steam workshop downloader, here are the steps on how to add mods automatically:

<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">1. Click on the "Steam Workshop"</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">2. Search for the workshop ID, the workshop ID would be the last digits on the link (e.g. https://steamcommunity.com/sharedfiles/filedetails/?id='''1628611721''')</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">3. A preview of the mod will appear in the middle with "install" and "details" button</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">4. Click on the "install" button and it will automatically install the mod, create the .mod files and automatically add it on your GameUserSettings.ini config file.</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">5. Restart your server.</span></li>

===== Adding a mod manually =====
Due to a bug with steam you may get "Assertion Failed" errors, you can ignore this, just wait until the process says completed.

<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">1. Find a mod that you want to use on the steam workshop for example https://steamcommunity.com/sharedfiles/filedetails/?id=1628611721</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">2. In the game panel click on install/update mods and enter the mod id (example 1652044230 if there are multiple mods separate them with a , example 1628611721,1628611721)</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">3. Add the mods to your ServerGrid.json configuration file and save it e.g. "ModIDs": "1628611721,1628611721",</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">4. Upload the .mod files from your pc to the server - location: \ShooterGame\Content\Mods</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">5. Restart your server.</span></li>
<br>
<br>
===== If you are using a non-seamless map (Such as Blackwood) follow the below steps instead =====
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">1. Find a mod that you want to use on the steam workshop for example https://steamcommunity.com/sharedfiles/filedetails/?id=1628611721</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">2. In the game panel click on install/update mods and enter the mod id (example 1234567890 if there are multiple mods separate them with a , example 1628611721,1628611721)</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">3. Add the mods to your GameUserSettings.ini configuration file and save it e.g. ActiveMods=1628611721,1628611721</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">4. Upload the .mod files from your pc to the server - location: \ShooterGame\Content\Mods</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">5. Restart your server.</span></li>

[[Category:Atlas]] [[Category:Atlas Game Server Help Articles]]

How to add mods in Atlas

2020-12-02T20:16:28Z

Alvin singco s: Created page with "<p style="text-align: center;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;"><strong><span style="color: #222222; background-color: #ffffff;">How t..."

<p style="text-align: center;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;"><strong><span style="color: #222222; background-color: #ffffff;">How to Add Mods</span></strong></span></p>
<hr />
<br>
<br>
===== Adding a mod =====
Due to a bug with steam you may get "Assertion Failed" errors, you can ignore this, just wait until the process says completed.

<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">1. Find a mod that you want to use on the steam workshop for example https://steamcommunity.com/sharedfiles/filedetails/?id=1652044230</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">2. In the game panel click on install/update mods and enter the mod id (example 1652044230 if there are multiple mods separate them with a , example 1652044230,1652044230)</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">3. Add the mods to your ServerGrid.json configuration file and save it e.g. "ModIDs": "1652044230,1652044230",</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">4. Upload the .mod files from your pc to the server - location: \ShooterGame\Content\Mods</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">5. Restart your server.</span></li>
<br>
<br>
===== If you are using a non-seamless map (Such as Blackwood) follow the below steps instead =====
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">1. Find a mod that you want to use on the steam workshop for example https://steamcommunity.com/sharedfiles/filedetails/?id=1652044230</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">2. In the game panel click on install/update mods and enter the mod id (example 1652044230 if there are multiple mods separate them with a , example 1652044230,1652044230)</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">3. Add the mods to your GameUserSettings.ini configuration file and save it e.g. ActiveMods=1652044230,1652044230</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">4. Upload the .mod files from your pc to the server - location: \ShooterGame\Content\Mods</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">5. Restart your server.</span></li>

[[Category:Atlas]] [[Category:Atlas Game Server Help Articles]]

Talk:Atlas Game Servers

2020-12-02T20:14:55Z

Alvin singco s: Blanked the page

Talk:Atlas Game Servers

2020-12-02T20:11:35Z

<p style="text-align: center;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;"><strong><span style="color: #222222; background-color: #ffffff;">How to Add Mods</span></strong></span></p>
<hr />
<br>
<br>
===== Adding a mod =====
Due to a bug with steam you may get "Assertion Failed" errors, you can ignore this, just wait until the process says completed.

<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">1. Find a mod that you want to use on the steam workshop for example https://steamcommunity.com/sharedfiles/filedetails/?id=1652044230</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">2. In the game panel click on install/update mods and enter the mod id (example 1652044230 if there are multiple mods separate them with a , example 1652044230,1652044230)</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">3. Add the mods to your ServerGrid.json configuration file and save it e.g. "ModIDs": "1652044230,1652044230",</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">4. Upload the .mod files from your pc to the server - location: \ShooterGame\Content\Mods</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">5. Restart your server.</span></li>
<br>
<br>
===== If you are using a non-seamless map (Such as Blackwood) follow the below steps instead =====
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">1. Find a mod that you want to use on the steam workshop for example https://steamcommunity.com/sharedfiles/filedetails/?id=1652044230</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">2. In the game panel click on install/update mods and enter the mod id (example 1652044230 if there are multiple mods separate them with a , example 1652044230,1652044230)</span></li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">3. Add the mods to your GameUserSettings.ini configuration file and save it e.g. ActiveMods=1652044230,1652044230</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">4. Upload the .mod files from your pc to the server - location: \ShooterGame\Content\Mods</span></li>
</li>
<li style="text-align: justify;"><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt;">5. Restart your server.</span></li>

[[Category:Atlas]] [[Category:Atlas Game Server Help Articles]]

FTP Set-up Guide

2020-11-04T17:16:24Z

Alvin singco s:

<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">Server owners commonly come across some third-party add-on that requires to be manually installed on their server. To do this, one must be able to access the server itself, and with the help of an FTP client one may achieve that.<br /><br /><strong>Steps:</strong></span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">1. Download an FTP client. Here's a few you could use. This tutorial will be using Filezilla 3.31.0 (2018-02-23).</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">https://filezilla-project.org/download.php?type=client</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">http://www.smartftp.com/</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">http://winscp.net/eng/index.php
</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;"> </span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">2. Open FileZilla. The first thing you have to take note of is the series of text boxes asking for the host, your username and password, and the port.</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">[[File:YkFTSvd.png]]
</span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;"> </span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">3. Host - The IP of the server, not the game's port! FTP port is 8821. </span><span style="font-size: small;">Usually you can find it in your gameserver's panel. If not, just add 8821 to the "Port".</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">[[File:FjdAgJX.png]]
</span><br /><br /><span style="font-size: small;">Username - Your TCAdmin account name.</span><br /><span style="font-size: small;">Password - Your TCAdmin account password.</span><br /><span style="font-size: small;">Port - This will be 8821.</span><br /><br /><span style="font-size: small;">FileZilla will transfer the port put into the "Host", the number after the ':', to the "Port" text box.</span><br /><br /><span style="font-size: small;">Once you're done, click "Quickconnect".</span><br /><span style="font-size: small;">[[File:89KinRQ.png]]></span><br /><br /></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">4) Now you should be in. At this point, you should navigate to the directory you need to go to, both client-side (The left box) and server-side (The right box).</span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">5) Once you're at the directories, just drag the item you want to upload to the server and it will begin uploading. You can do the same to download files.</span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">6) If you need to make a small edit in the server, you can just right-click on an item and press "View/Edit". Save the file once you're done editing and FileZilla will detect a change, and will ask whether you want to upload the file or not.</span><br /><br /><span style="font-size: small;">That's it! </span><span style="font-size: small;">You can make a ticket in case you have issues with FTP or installing certain add-ons.</span></p><br /><br />

<center>== <big>'''WINSCP'''</big> ==</center> <br /><br />

<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">1. Open WinSCP. The first thing you have to take note of is the series of text boxes asking for the host, your username and password, and the port.</span>
<span style="font-size: small; margin-left: 60px;">[[File:1st.jpg|800px|thumb|center]]></span><br /><br /></p>

</span><br /><br /><span style="font-size: small;">Username - Your TCAdmin account name.</span><br /><span style="font-size: small;">Password - Your TCAdmin account password.</span><br /><span style="font-size: small;">Port - This will be 8821.</span><br /><br /><span style="font-size: small;">WinSCP will transfer the port put into the "Host", the number after the ':', to the "Port" text box.</span><br /><br /><span style="font-size: small;">Once you're done, click "Login".</span><br />

[[Category: General Server Management Help]]

FTP Set-up Guide

2020-11-04T17:14:06Z

Alvin singco s:

<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">Server owners commonly come across some third-party add-on that requires to be manually installed on their server. To do this, one must be able to access the server itself, and with the help of an FTP client one may achieve that.<br /><br /><strong>Steps:</strong></span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">1. Download an FTP client. Here's a few you could use. This tutorial will be using Filezilla 3.31.0 (2018-02-23).</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">https://filezilla-project.org/download.php?type=client</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">http://www.smartftp.com/</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">http://winscp.net/eng/index.php
</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;"> </span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">2. Open FileZilla. The first thing you have to take note of is the series of text boxes asking for the host, your username and password, and the port.</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">[[File:YkFTSvd.png]]
</span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;"> </span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">3. Host - The IP of the server, not the game's port! FTP port is 8821. </span><span style="font-size: small;">Usually you can find it in your gameserver's panel. If not, just add 8821 to the "Port".</span></p>
<p style="text-align: left; margin-left: 90px;"><span style="font-size: small;">[[File:FjdAgJX.png]]
</span><br /><br /><span style="font-size: small;">Username - Your TCAdmin account name.</span><br /><span style="font-size: small;">Password - Your TCAdmin account password.</span><br /><span style="font-size: small;">Port - This will be 8821.</span><br /><br /><span style="font-size: small;">FileZilla will transfer the port put into the "Host", the number after the ':', to the "Port" text box.</span><br /><br /><span style="font-size: small;">Once you're done, click "Quickconnect".</span><br /><span style="font-size: small;">[[File:89KinRQ.png]]></span><br /><br /></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">4) Now you should be in. At this point, you should navigate to the directory you need to go to, both client-side (The left box) and server-side (The right box).</span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">5) Once you're at the directories, just drag the item you want to upload to the server and it will begin uploading. You can do the same to download files.</span></p>
<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">6) If you need to make a small edit in the server, you can just right-click on an item and press "View/Edit". Save the file once you're done editing and FileZilla will detect a change, and will ask whether you want to upload the file or not.</span><br /><br /><span style="font-size: small;">That's it! </span><span style="font-size: small;">You can make a ticket in case you have issues with FTP or installing certain add-ons.</span></p><br /><br />

== <big>'''WINSCP'''</big> ==<br /><br />

<p style="text-align: left; margin-left: 60px;"><span style="font-size: small;">1. Open WinSCP. The first thing you have to take note of is the series of text boxes asking for the host, your username and password, and the port.</span>
<span style="font-size: small; margin-left: 60px;">[[File:1st.jpg|800px|thumb|center]]></span><br /><br /></p>

</span><br /><br /><span style="font-size: small;">Username - Your TCAdmin account name.</span><br /><span style="font-size: small;">Password - Your TCAdmin account password.</span><br /><span style="font-size: small;">Port - This will be 8821.</span><br /><br /><span style="font-size: small;">WinSCP will transfer the port put into the "Host", the number after the ':', to the "Port" text box.</span><br /><br /><span style="font-size: small;">Once you're done, click "Login".</span><br />

[[Category: General Server Management Help]]

File:1st.jpg

2020-11-04T16:20:24Z

Alvin singco s:

winscp1

Adding Steam Workshop Mod To Atlas Server

2020-02-19T19:37:12Z

Alvin singco s: Created page with "<div class="kb-article-content"> <p>Here is a guide on how to get Steam Workshop mods onto your Atlas server.</p> <p><strong>Step 1 ) </strong>Find your Mod Workshop..."

<div class="kb-article-content">
<p>Here is a guide on how to get Steam Workshop mods onto your Atlas server.</p>
<p><strong>Step 1 ) </strong>Find your Mod Workshop ID's.</p>
<p><strong>Step 2 )</strong> Go to Configuration Files and open your ServerGrid.ini in the Game Panel and open it in the text editor.</p>
<p><strong>Step 3 )</strong> In a new tab, go find the Steam Workshop mods you wish to install.<br>eg. https://steamcommunity.com/sharedfiles/filedetails/?id=1630726435<br>Take the ID number after ID=, in the above example this is 1630726435</p>
<p><strong>Step 4 ) </strong>Under the  "ModIDs": "", section in the ServerGrid.json, add your WorkshopModID's  between the brackets, separated by commas for multiple mods.<br>eg.  "ModIDs": "1630726435,1643109631",</p>
<p>[[File:Servergridmods.png|320px]]
</p>
<p><strong>Step 5 ) </strong>Save the ServerGrid.json</p>
<p><strong>Step 6 ) </strong>Start your server, your mods will automatically download on server startup and will launch.</p>
<p>To add more mods, simply follow the steps above again, adding more mods separated by commas to the mod section of the servergrid.json</p>
</div>

[[Category:Atlas]] [[Category:Atlas Game Server Help Articles]]

File:Servergridmods.png

2020-02-19T19:26:30Z

Alvin singco s:

ddd

Adding mods to your ARK server

2019-08-28T20:13:59Z

Alvin singco s:

<div style="text-align: center;"><span style="font-size: small;">Installing Steam Workshop mods for ARK: Survival Evolved is as follows:

Go to the Workshop gui, it looks like this on the game panel:

[[File:Steam.png|120px]]

Once in the gui, search for the mod you wish to install and install it.

Start the server.

---

**Troubleshooting Steps:**

Go to GameUserSettings.ini in the Configuration Files menu, it looks like this in the game panel:

[[File:Do1.png|120px]]

Once in the file, you need to search for a line that starts with **ActiveMods=**

Then make sure there's the mod ID of the mod in that line.

''Example:''

ActiveMods=1814953878

If there are multiple mods, they need to be separated by a comma.

''Example:''

ActiveMods=1814953878,1734595558

After you've confirmed that the mod has been added to the file, open the File Manager, it looks like this in the game panel:

[[File:FileManager.png|480px]]

Then go to the **ShooterGame\Content\Mods\** directory.

Then, make sure there is a .mod file for each workshop mod installed.

If all files are there and the server still isn't working, contact support or your superiors.

Otherwise, the server should work just fine.

Check if it's up on steam to confirm.

---

**Installing Workshop Maps:**

Installing Steam Workshop maps for ARK: Survival Evolved is as follows:

Go to the Workshop Gui, it looks like this in the game panel:

[[File:Steam.png|120px]]

Search for and install the map you want to use.

Go to GameUserSettings.ini in the Configuration Files menu, it looks like this in the game panel:

[[File:Do1.png|120px]]

Once in the file, you need to search for a line that starts with **ActiveMods=**

Then make sure there's the mod ID of the mod in that line.

''Example:''

ActiveMods=1814953878

If there are multiple mods, they need to be separated by a comma.

''Example:''

ActiveMods=1814953878,1734595558

After that, go to the Commandline Manager, it looks like this in the game panel:

[[File:CmdLine.png|120px]]

Once in the commandline manager, select ARK With Mods and select the map from the drop down.

If you use the Ark With Mods, And Custom Map commandline, you'll need to manually set the map, it gives information on it in the tooltip if you hover over it.

Once that's done, save your changes and restart the server.

[[Category:Ark Survival Evolved]] [[Category:Ark Survival Evolved Server Configuration]]

How do i Bind my Additional IPs?

2019-08-20T18:45:09Z

Alvin singco s:

<p><strong>These instructions are for CentOS / Fedora specifically.</strong></p>
<p> </p>
<p>By default, Citadel Servers only binds your first primary IP address. This is because there are different methods of applying your additional IPs that may require that they not be bound originally.</p>
<p>Below we show two methods of binding IP addresses to your server.</p>
<p> </p>
<p><strong>Method one: Editing the eth adaptor file</strong></p>
<p> </p>
<p>By default the main ip (Primary eth adaptor) for your server is stored in:</p>
<p> </p>
<p><sup>/etc/sysconfig/network-scripts/ifcfg-eth0</sup></p>
<p> </p>
<p>To add additional IPs to your server you need to increment the end of this file from eth0 to eth1 per addtional eth adaptor. Here are some examples:</p>
<p>Your primary IP\First IP would remain as:<br /><br /></p>
<p><sub>/etc/sysconfig/network-scripts/ifcfg-eth0<br /><br /></sub></p>
<p>So your Secondary\1st additional IP set would be:<br /><br /></p>
<p><sub>/etc/sysconfig/network-scripts/ifcfg-eth0:0<br /><br /></sub></p>
<p>So your 4rd IP set would be:<br /><br /></p>
<p><sub>/etc/sysconfig/network-scripts/ifcfg-eth0:3</sub></p>
<p> <br />This will allow you to add a an additional IP address to your server. In this example we will add a 2nd additional IP to the server.</p>
<p>In this example we will use the default linux editor, VI.</p>
<p>This will copy the file ending with eth0 to a new file ending with (eth0:1)</p>
<p> </p>
<p><sup>cp /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth0:1</sup></p>
<p> </p>
<p>We will now open the newly created file with the VI text editor:</p>
<p> </p>
<p><sup>vi /etc/sysconfig/network-scripts/ifcfg-eth0:1</sup></p>
<p> </p>
<p>You should see the text below. Edit your IP address, netmask and gateway and increment the Device field to match file name (eth0:1 in this example)</p>
<p>Press the insert button on your keyboard to type.<br /><br /></p>
<p><sub>DEVICE="eth0:1"</sub></p>
<p><sub>BOOTPROTO="static"</sub></p>
<p><sub>IPADDR="IP.FAIL.OVER"</sub></p>
<p><sub>NETMASK="255.255.255.255"</sub></p>
<p><sub>ONBOOT="yes"</sub></p>
<p><sub>BROADCAST="IP.FAIL.OVER"</sub></p>
<p><sub>DNS1=192.99.37.204</sub></p>
<p><sub>DNS2=192.99.37.205</sub></p>
<p><sub> </sub></p>
<p> </p>
<p>Press Esc then type :wq</p>
<p>Restart the network service</p>
<p><br /><sup>/etc/init.d/network restart</sup></p>
<p><br /><br />type ifconfig to make sure it is all set correctly.</p>
<p>You should now be able to ping the outside world</p>
<p><br /><sup>ping citadelservers.com<br /><br /></sup></p>
<p><strong>Method two: Using Grep</strong></p>
<p><strong> </strong></p>
<h4>Find out which interface is your public</h4>
<div id="crayon-54e8d83fdceb3955831080" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8d83fdceb3955831080-1">1</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8d83fdceb3955831080-2">2</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8d83fdceb3955831080-1" class="crayon-line"><span class="crayon-sy">[</span>root<span class="crayon-sy">@</span>CS<span class="crayon-o">-</span>D<span class="crayon-o">#</span><span class="crayon-o">#</span><span class="crayon-o">#</span><span class="crayon-o">#</span><span class="crayon-o">~</span><span class="crayon-sy">]</span><span class="crayon-o">#</span>route<span class="crayon-o">|</span>grep<span class="crayon-e "> -v</span><span class="crayon-s">"10."</span><span class="crayon-o">|</span>grep<span class="crayon-e "> -m</span>1<span class="crayon-s">"255.255"</span><span class="crayon-o">|</span>awk<span class="crayon-s">'{ print $8 }'</span></div>
<div id="crayon-54e8d83fdceb3955831080-2" class="crayon-line crayon-striped-line"><span class="crayon-r ">eth1</span></div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<p><strong>This shows that my public interface (does not have a “10.” address) is <strong>eth1</strong>.</strong></p>
<p> </p>
<h4>2) Create the route file</h4>
<p>Before running the command below, change “<strong>eth1</strong>” to your public interface from step 1 and set your START and END IP addresses in the range.</p>
<p><strong>Note:</strong>Your IPADDR_START should be your second usable IP as your primary is already bound. The IPADDR_END value is your last usable IP. If you are unsure what these values are please check your welcome e-mail or [https://citadelservers.com/client/submitticket.php open a support ticket.]</p>
<div id="crayon-54e8d83fdcec2300961243" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8d83fdcec2300961243-1">1</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8d83fdcec2300961243-2">2</div>
<div class="crayon-num" data-line="crayon-54e8d83fdcec2300961243-3">3</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8d83fdcec2300961243-1" class="crayon-line"><span class="crayon-k">echo</span><span class="crayon-s"> "IPADDR_START=123.123.123.4</span></div>
<div id="crayon-54e8d83fdcec2300961243-2" class="crayon-line crayon-striped-line"><span class="crayon-r ">IPADDR_END</span><span class="crayon-o">=</span>123<span class="crayon-sy">.</span>123<span class="crayon-sy">.</span>123<span class="crayon-sy">.</span>5</div>
<div id="crayon-54e8d83fdcec2300961243-3" class="crayon-line"><span class="crayon-r ">CLONENUM_START</span><span class="crayon-o">=</span>0"<span class="crayon-o">>></span><span class="crayon-o">/</span>etc<span class="crayon-o">/</span>sysconfig<span class="crayon-o">/</span>network<span class="crayon-o">-</span>scripts<span class="crayon-o">/</span>ifcfg<span class="crayon-o">-</span>eth1<span class="crayon-o">-</span>range0</div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<h4>3) Restart your network interface</h4>
<p> </p>
<div id="crayon-54e8d83fdcecb735473377" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8d83fdcecb735473377-1">1</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8d83fdcecb735473377-1" class="crayon-line"><span class="crayon-r ">service</span>networkrestart</div>
</div>
</td>
</tr>
</tbody>
</table>
</div>
</div>
<p><strong> </strong></p>

[[Category: Linux Help]]

How do i Bind my Additional IPs?

2019-08-20T18:39:26Z

Alvin singco s: Created page with "<p><strong>These instructions are for CentOS / Fedora specifically.</strong></p> <p> </p> <p>By default, Citadel Servers only binds your first primary IP address. This is bec..."

<p><strong>These instructions are for CentOS / Fedora specifically.</strong></p>
<p> </p>
<p>By default, Citadel Servers only binds your first primary IP address. This is because there are different methods of applying your additional IPs that may require that they not be bound originally.</p>
<p>Below we show two methods of binding IP addresses to your server.</p>
<p> </p>
<p><strong>Method one: Editing the eth adaptor file</strong></p>
<p> </p>
<p>By default the main ip (Primary eth adaptor) for your server is stored in:</p>
<p> </p>
<p><sup>/etc/sysconfig/network-scripts/ifcfg-eth0</sup></p>
<p> </p>
<p>To add additional IPs to your server you need to increment the end of this file from eth0 to eth1 per addtional eth adaptor. Here are some examples:</p>
<p>Your primary IP\First IP would remain as:<br /><br /></p>
<p><sub>/etc/sysconfig/network-scripts/ifcfg-eth0<br /><br /></sub></p>
<p>So your Secondary\1st additional IP set would be:<br /><br /></p>
<p><sub>/etc/sysconfig/network-scripts/ifcfg-eth0:0<br /><br /></sub></p>
<p>So your 4rd IP set would be:<br /><br /></p>
<p><sub>/etc/sysconfig/network-scripts/ifcfg-eth0:3</sub></p>
<p> <br />This will allow you to add a an additional IP address to your server. In this example we will add a 2nd additional IP to the server.</p>
<p>In this example we will use the default linux editor, VI.</p>
<p>This will copy the file ending with eth0 to a new file ending with (eth0:1)</p>
<p> </p>
<p><sup>cp /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth0:1</sup></p>
<p> </p>
<p>We will now open the newly created file with the VI text editor:</p>
<p> </p>
<p><sup>vi /etc/sysconfig/network-scripts/ifcfg-eth0:1</sup></p>
<p> </p>
<p>You should see the text below. Edit your IP address, netmask and gateway and increment the Device field to match file name (eth0:1 in this example)</p>
<p>Press the insert button on your keyboard to type.<br /><br /></p>
<p><sub>DEVICE="eth0:1"</sub></p>
<p><sub>BOOTPROTO="static"</sub></p>
<p><sub>IPADDR="IP.FAIL.OVER"</sub></p>
<p><sub>NETMASK="255.255.255.255"</sub></p>
<p><sub>ONBOOT="yes"</sub></p>
<p><sub>BROADCAST="IP.FAIL.OVER"</sub></p>
<p><sub>DNS1=192.99.37.204</sub></p>
<p><sub>DNS2=192.99.37.205</sub></p>
<p><sub> </sub></p>
<p> </p>
<p>Press Esc then type :wq</p>
<p>Restart the network service</p>
<p><br /><sup>/etc/init.d/network restart</sup></p>
<p><br /><br />type ifconfig to make sure it is all set correctly.</p>
<p>You should now be able to ping the outside world</p>
<p><br /><sup>ping citadelservers.com<br /><br /></sup></p>
<p><strong>Method two: Using Grep</strong></p>
<p><strong> </strong></p>
<h4>Find out which interface is your public</h4>
<div id="crayon-54e8d83fdceb3955831080" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8d83fdceb3955831080-1">1</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8d83fdceb3955831080-2">2</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8d83fdceb3955831080-1" class="crayon-line"><span class="crayon-sy">[</span>root<span class="crayon-sy">@</span>CS<span class="crayon-o">-</span>D<span class="crayon-o">#</span><span class="crayon-o">#</span><span class="crayon-o">#</span><span class="crayon-o">#</span><span class="crayon-o">~</span><span class="crayon-sy">]</span><span class="crayon-o">#</span>route<span class="crayon-o">|</span>grep<span class="crayon-e "> -v</span><span class="crayon-s">"10."</span><span class="crayon-o">|</span>grep<span class="crayon-e "> -m</span>1<span class="crayon-s">"255.255"</span><span class="crayon-o">|</span>awk<span class="crayon-s">'{ print $8 }'</span></div>
<div id="crayon-54e8d83fdceb3955831080-2" class="crayon-line crayon-striped-line"><span class="crayon-r ">eth1</span></div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<p><strong>This shows that my public interface (does not have a “10.” address) is <strong>eth1</strong>.</strong></p>
<p> </p>
<h4>2) Create the route file</h4>
<p>Before running the command below, change “<strong>eth1</strong>” to your public interface from step 1 and set your START and END IP addresses in the range.</p>
<p><strong>Note:</strong>Your IPADDR_START should be your second usable IP as your primary is already bound. The IPADDR_END value is your last usable IP. If you are unsure what these values are please check your welcome e-mail or <a href="https://citadelservers.com/client/submitticket.php">open a support ticket.</a></p>
<div id="crayon-54e8d83fdcec2300961243" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8d83fdcec2300961243-1">1</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8d83fdcec2300961243-2">2</div>
<div class="crayon-num" data-line="crayon-54e8d83fdcec2300961243-3">3</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8d83fdcec2300961243-1" class="crayon-line"><span class="crayon-k">echo</span><span class="crayon-s"> "IPADDR_START=123.123.123.4</span></div>
<div id="crayon-54e8d83fdcec2300961243-2" class="crayon-line crayon-striped-line"><span class="crayon-r ">IPADDR_END</span><span class="crayon-o">=</span>123<span class="crayon-sy">.</span>123<span class="crayon-sy">.</span>123<span class="crayon-sy">.</span>5</div>
<div id="crayon-54e8d83fdcec2300961243-3" class="crayon-line"><span class="crayon-r ">CLONENUM_START</span><span class="crayon-o">=</span>0"<span class="crayon-o">>></span><span class="crayon-o">/</span>etc<span class="crayon-o">/</span>sysconfig<span class="crayon-o">/</span>network<span class="crayon-o">-</span>scripts<span class="crayon-o">/</span>ifcfg<span class="crayon-o">-</span>eth1<span class="crayon-o">-</span>range0</div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<h4>3) Restart your network interface</h4>
<p> </p>
<div id="crayon-54e8d83fdcecb735473377" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8d83fdcecb735473377-1">1</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8d83fdcecb735473377-1" class="crayon-line"><span class="crayon-r ">service</span>networkrestart</div>
</div>
</td>
</tr>
</tbody>
</table>
</div>
</div>
<p><strong> </strong></p>

[[Category: Linux Help]]

How do I use iptables?

2019-08-20T18:28:05Z

Alvin singco s: Created page with "<h4>Warning</h4> <p> </p> <p>Modifying rules on your server can cause the server to become inaccessible on port 22 (SSH) or your alternate SSH port.</p> <p> </p> <h4>Descrip..."

<h4>Warning</h4>
<p> </p>
<p>Modifying rules on your server can cause the server to become inaccessible on port 22 (SSH) or your alternate SSH port.</p>
<p> </p>
<h4>Description / Basic Overview</h4>
<p> </p>
<p>Everyone in the IT industry is very concerned with security, especially if you’re a linux administrator. Many linux distributions come with several services that you may not use or ever need but they’re running on your server anyways. This can cause many security threats. With the slightest knowledge of Linux firewalls (iptables) you can secure your linux server very quickly and efficiently. In this article, I will either introduce you into iptables for your first time, or help you become more efficient with iptables if you’ve worked with them in the past.</p>
<p> </p>
<p>As network packets flow in and out of the network interface card, they are intercepted, analyzed and manipulated as ruled through the Linux firewall. As the packet flows through the firewall rules and it reaches a rule that is matches, it stops there and doesn’t continue through the rest of the rule set. For instance, if there is a rule to drop all packets coming in through port 25 and then a rule directly after that says “accept 192.168.1.25 on port 25” That packet will be dropped once it hits the first rule. It won’t even know there is a second rule. Read the first example further down this article. There is an example. There have been 3 main linux firewalls widely used, and they are as follows:</p>
<p> </p>
<h4>History</h4>
<p> </p>
<ul>
<li>Ipfwadm which was merged into Linux 2.0. It can filter TCP, UDP, and ICMP packets only. It also does not support QoS. You can “insert” and “remove” rules. This doesn’t make it the most user friendly linux firewall on the planet.</li>
<li>Ipchains which was merged into Linux 2.2. It supports QoS, Is very flexible with the configuration, as it has “replace” along with “insert” and “remove”. This makes ipchains more user friendly. Ipchains also has the ability to filter any IP protocol explicitly, not just TCP, UDP, and ICMP.</li>
<li>Iptables. This iptables project was begun in 1998 by Rusty Russell. This was merged into Linux 2.3 in 2000, and is still widely used today. It supports stateful IPv4, and IPv6 protocol tracking and IPv4 application tracking. Has built-in PORTFW functionality. It is also very user friendly, as you’ll soon find out.<br /><br /></li>
</ul>
<h4>Getting started</h4>
<p> </p>
<p>Let’s take a look at our iptables list, see what is currently under there!</p>
<div id="crayon-54e8da7801699980991447" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8da7801699980991447-1">1</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8da7801699980991447-1" class="crayon-line"><span class="crayon-o">/</span>sbin<span class="crayon-o">/</span>iptables<span class="crayon-e "> -L</span><span class="crayon-e "> -n</span></div>
</div>
</td>
</tr>
</tbody>
</table>
</div>
</div>
<p>That will show you your complete iptables rule list, with as much information as possible about each rule. Let’s break down what you’re looking at you should see something similar to: (note: the following is an empty table you may have some rules in yours).</p>
<div id="crayon-54e8da78016a8236934036" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8da78016a8236934036-1">1</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016a8236934036-2">2</div>
<div class="crayon-num" data-line="crayon-54e8da78016a8236934036-3">3</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016a8236934036-4">4</div>
<div class="crayon-num" data-line="crayon-54e8da78016a8236934036-5">5</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016a8236934036-6">6</div>
<div class="crayon-num" data-line="crayon-54e8da78016a8236934036-7">7</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016a8236934036-8">8</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8da78016a8236934036-1" class="crayon-line">ChainINPUT<span class="crayon-sy">(</span>policyACCEPT<span class="crayon-sy">)</span></div>
<div id="crayon-54e8da78016a8236934036-2" class="crayon-line crayon-striped-line">target<span class="crayon-h">         </span>prot<span class="crayon-h">         </span>opt<span class="crayon-h">         </span>source<span class="crayon-h">               </span>destination</div>
<div id="crayon-54e8da78016a8236934036-3" class="crayon-line"> </div>
<div id="crayon-54e8da78016a8236934036-4" class="crayon-line crayon-striped-line">ChainFORWARD<span class="crayon-sy">(</span>policyACCEPT<span class="crayon-sy">)</span></div>
<div id="crayon-54e8da78016a8236934036-5" class="crayon-line">target<span class="crayon-h">         </span>prot<span class="crayon-h">         </span>opt<span class="crayon-h">         </span>source<span class="crayon-h">               </span>destination</div>
<div id="crayon-54e8da78016a8236934036-6" class="crayon-line crayon-striped-line"> </div>
<div id="crayon-54e8da78016a8236934036-7" class="crayon-line">ChainOUTPUT<span class="crayon-sy">(</span>policyACCEPT<span class="crayon-sy">)</span></div>
<div id="crayon-54e8da78016a8236934036-8" class="crayon-line crayon-striped-line">target<span class="crayon-h">         </span>prot<span class="crayon-h">         </span>opt<span class="crayon-h">         </span>source<span class="crayon-h">               </span>destination</div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<p>Flushing your list of rules can be good if you would like to rewrite your rules completely as I’ve done plenty of times in the past. You can “flush” every rule under iptables by doing:</p>
<div id="crayon-54e8da78016b1600775410" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8da78016b1600775410-1">1</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8da78016b1600775410-1" class="crayon-line"><span class="crayon-o">/</span>sbin<span class="crayon-o">/</span>iptables<span class="crayon-e "> -F</span></div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<p>However you may want to only flush all the rules under the INPUT, FORWARD or OUTPUT chain. You can specify which chain to flush by either of the following:</p>
<ul>
<li>/sbin/iptables -F INPUT</li>
<li>/sbin/iptables -F FORWARD</li>
<li>/sbin/iptables -F OUTPUT</li>
</ul>
<p>Additionally, you can save your rules so that when you restart your linux server, the current rules will become active once again. You can save by doing:</p>
<div id="crayon-54e8da78016ba808229231" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8da78016ba808229231-1">1</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8da78016ba808229231-1" class="crayon-line"><span class="crayon-o">/</span>etc<span class="crayon-o">/</span>init<span class="crayon-sy">.</span>d<span class="crayon-o">/</span>iptablessave</div>
</div>
</td>
</tr>
</tbody>
</table>
</div>
</div>
<p>If you would wish for iptables to STOP running, you can initiate the following command:</p>
<div id="crayon-54e8da78016c3352639821" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8da78016c3352639821-1">1</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016c3352639821-2">2</div>
<div class="crayon-num" data-line="crayon-54e8da78016c3352639821-3">3</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016c3352639821-4">4</div>
<div class="crayon-num" data-line="crayon-54e8da78016c3352639821-5">5</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016c3352639821-6">6</div>
<div class="crayon-num" data-line="crayon-54e8da78016c3352639821-7">7</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016c3352639821-8">8</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8da78016c3352639821-1" class="crayon-line"><span class="crayon-o">#</span><span class="crayon-o">></span><span class="crayon-o">/</span>etc<span class="crayon-o">/</span>init<span class="crayon-sy">.</span>d<span class="crayon-o">/</span>iptablesstop</div>
<div id="crayon-54e8da78016c3352639821-2" class="crayon-line crayon-striped-line"> </div>
<div id="crayon-54e8da78016c3352639821-3" class="crayon-line">Flushingfirewallrules<span class="crayon-o">:</span><span class="crayon-h">                                       </span><span class="crayon-sy">[</span><span class="crayon-h">  </span>OK<span class="crayon-h">  </span><span class="crayon-sy">]</span></div>
<div id="crayon-54e8da78016c3352639821-4" class="crayon-line crayon-striped-line">SettingchainstopolicyACCEPT<span class="crayon-o">:</span>filter<span class="crayon-h">                    </span><span class="crayon-sy">[</span><span class="crayon-h">  </span>OK<span class="crayon-h">  </span><span class="crayon-sy">]</span></div>
<div id="crayon-54e8da78016c3352639821-5" class="crayon-line">Unloadingiptablesmodules<span class="crayon-o">:</span><span class="crayon-h">                                    </span><span class="crayon-sy">[</span><span class="crayon-h">  </span>OK<span class="crayon-h">  </span><span class="crayon-sy">]</span></div>
<div id="crayon-54e8da78016c3352639821-6" class="crayon-line crayon-striped-line"><span class="crayon-r ">Of</span>course<span class="crayon-sy">,</span>youcan<span class="crayon-k">START</span>iptablesbydoing</div>
<div id="crayon-54e8da78016c3352639821-7" class="crayon-line"><span class="crayon-o">/</span>etc<span class="crayon-o">/</span>init<span class="crayon-sy">.</span>d<span class="crayon-o">/</span>iptables<span class="crayon-k">start</span></div>
<div id="crayon-54e8da78016c3352639821-8" class="crayon-line crayon-striped-line">Applyingiptablesfirewallrules<span class="crayon-o">:</span><span class="crayon-h">             </span><span class="crayon-sy">[</span><span class="crayon-h">  </span>OK<span class="crayon-h">  </span><span class="crayon-sy">]</span></div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<p>As for an example, I have one below:</p>
<p> </p>
<h4>Example</h4>
<p> </p>
<p>You want to simply deny every IP address a connection to your SMTP server (tcp port 25) except for the IP: 192.168.1.25.</p>
<p>The two commands for this are as follows:</p>
<div id="crayon-54e8da78016cc860821799" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8da78016cc860821799-1">1</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016cc860821799-2">2</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8da78016cc860821799-1" class="crayon-line"><span class="crayon-o">/</span>sbin<span class="crayon-o">/</span>iptables<span class="crayon-e "> -I</span>INPUT<span class="crayon-e "> -p</span>tcp<span class="crayon-o">--</span>dport25<span class="crayon-e "> -j</span>DROP</div>
<div id="crayon-54e8da78016cc860821799-2" class="crayon-line crayon-striped-line"><span class="crayon-o">/</span>sbin<span class="crayon-o">/</span>iptables<span class="crayon-e "> -I</span>INPUT<span class="crayon-e "> -s</span>192<span class="crayon-sy">.</span>168<span class="crayon-sy">.</span>1<span class="crayon-sy">.</span>25<span class="crayon-e "> -p</span>tcp<span class="crayon-o">--</span>dport25<span class="crayon-e "> -j</span>ACCEPT</div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<p>The reason I put the “DROP” command in before the “ACCEPT” is because a rule is entered into the database, and then a rule that is added next is added directly above the last one entered. Putting the DROP command before the ACCEPT let’s the ACCEPT rule be read before the DROP command. Let’s break the rest of these commands down:</p>
<h5>The first command:</h5>
<ul>
<li><strong>-I</strong> is to insert the rule into the top of the chain. You would use -A to insert it at the bottom of the chain. (Note: you can do “–D” instead to delete the rule from the chain as well.)</li>
<li><strong>INPUT</strong> is the chain name. Input is the chain that is followed by “incoming” packets.</li>
<li><strong>-p</strong> is the protocol argument, you specify the protocol type with this command, notice the “tcp” after the “-p”</li>
<li><strong>–ddport</strong> is what specifies which port to filter. In this case it is 25, because that is what port SMTP runs on (by default).</li>
<li><strong>-j</strong> is the argument that specifies what to do with the packet. In this case, it’s going to be “DROPPED”</li>
</ul>
<h5>The second command:</h5>
<p>The only difference between this command and the first one, is there is a (-s) “src” IP address specified and the –j argument is “ACCEPT”.</p>
<p>Since a (-s) “src” address was not specified in the first argument, it assumed that every address is to be dropped.</p>
<p>Ok, let’s save our current work.</p>
<div id="crayon-54e8da78016d6660224014" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">
<tbody>
<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-54e8da78016d6660224014-1">1</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016d6660224014-2">2</div>
<div class="crayon-num" data-line="crayon-54e8da78016d6660224014-3">3</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016d6660224014-4">4</div>
<div class="crayon-num" data-line="crayon-54e8da78016d6660224014-5">5</div>
<div class="crayon-num crayon-striped-num" data-line="crayon-54e8da78016d6660224014-6">6</div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-54e8da78016d6660224014-1" class="crayon-line"><span class="crayon-o">#</span><span class="crayon-o">></span><span class="crayon-o">/</span>etc<span class="crayon-o">/</span>init<span class="crayon-sy">.</span>d<span class="crayon-o">/</span>iptablessave</div>
<div id="crayon-54e8da78016d6660224014-2" class="crayon-line crayon-striped-line"><span class="crayon-o">/</span>sbin<span class="crayon-o">/</span>iptables<span class="crayon-e "> -L</span><span class="crayon-e "> -n</span></div>
<div id="crayon-54e8da78016d6660224014-3" class="crayon-line">ChainINPUT<span class="crayon-sy">(</span>policyACCEPT<span class="crayon-sy">)</span></div>
<div id="crayon-54e8da78016d6660224014-4" class="crayon-line crayon-striped-line">target<span class="crayon-h">     </span>protoptsource<span class="crayon-h">               </span>destination</div>
<div id="crayon-54e8da78016d6660224014-5" class="crayon-line">ACCEPT<span class="crayon-h">          </span>tcp<span class="crayon-h">  </span><span class="crayon-o">--</span><span class="crayon-h">  </span>192<span class="crayon-sy">.</span>168<span class="crayon-sy">.</span>1<span class="crayon-sy">.</span>25<span class="crayon-h">         </span>0<span class="crayon-sy">.</span>0<span class="crayon-sy">.</span>0<span class="crayon-sy">.</span>0<span class="crayon-o">/</span>0<span class="crayon-h">           </span>tcpdpt<span class="crayon-o">:</span>25</div>
<div id="crayon-54e8da78016d6660224014-6" class="crayon-line crayon-striped-line">DROP<span class="crayon-h">           </span>tcp<span class="crayon-h">  </span><span class="crayon-o">--</span><span class="crayon-h">  </span>0<span class="crayon-sy">.</span>0<span class="crayon-sy">.</span>0<span class="crayon-sy">.</span>0<span class="crayon-o">/</span>0<span class="crayon-h">                </span>0<span class="crayon-sy">.</span>0<span class="crayon-sy">.</span>0<span class="crayon-sy">.</span>0<span class="crayon-o">/</span>0<span class="crayon-h">           </span>tcpdpt<span class="crayon-o">:</span>25</div>
</div>
</td>
</tr>
</tbody>
</table>
<p> </p>
</div>
</div>
<p><strong>Notice:</strong> how the “ACCEPT” rule is above the “DROP” rule.</p>

[[Category: Linux Help]]

Category:Help

2019-08-20T18:23:05Z

Alvin singco s:

== Account Help ==

<DynamicPageList>
category = Citadel Servers - Account help
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

== cPanel Help ==

<DynamicPageList>
category = cPanel
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

== General Server Management ==

<DynamicPageList>
category = General Server Management Help
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

== Game Panel ==

<DynamicPageList>
category = Game Panel Help
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

== Linux ==

<DynamicPageList>
category = Linux Help
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

How do i run or do a Ping test to a IP address

2019-08-20T18:09:01Z

Alvin singco s: Created page with "<p style="text-align: left;"><strong>PING</strong> stands for<strong> Packet Internet Groper</strong>.</p> <p><em>This is a simple diagnostic tool implemented in both Windows..."

<p style="text-align: left;"><strong>PING</strong> stands for<strong> Packet Internet Groper</strong>.</p>
<p><em>This is a simple diagnostic tool implemented in both Windows and Linux that enables you the ability to test for basic communication between two network nodes within a LAN or across the WAN/Internet.</em></p>
<p>The concept is simple – a special packet is sent from a source machine to a destination machine at which the destination machine responds back.<br /><br /></p>
<p>The time it takes for this process to complete helps determine two things:</p>
<ol>
<li>Does the destination machine respond?</li>
<li>How long does it take the destination machine to respond back?</li>
</ol>
<p><br />To run this tool is very simple.<br /><br /></p>
<p>For windows you simply open a command prompt:</p>
<div id="crayon-5510c05b00480821555967" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">

<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-5510c05b00480821555967-1"> </div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-5510c05b00480821555967-1" class="crayon-line"><sup><span class="crayon-r ">Go</span>to <span class="crayon-k">Start </span><span class="crayon-o">-> </span>run <span class="crayon-o">-> </span><span class="crayon-r">type</span>CMD <span class="crayon-o">-></span>press enter</sup></div>
</div>
</td>
</tr>

</table>
</div>
</div>
<p>Within the command prompt you will type:</p>
<div id="crayon-5510c05b0048e925373755" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">

<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-5510c05b0048e925373755-1"> </div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-5510c05b0048e925373755-1" class="crayon-line"><sup><span class="crayon-r ">ping </span>destination<span class="crayon-o">-</span>IP<span class="crayon-e "> -n</span>10</sup></div>
</div>
</td>
</tr>

</table>
</div>
</div>
<p>For example:</p>
<div id="crayon-5510c05b00497489146914" class="crayon-syntax crayon-theme-coda-special-board crayon-font-monaco crayon-os-pc print-yes notranslate crayon-wrapped" data-settings=" minimize scroll-mouseover wrap">
<div class="crayon-plain-wrap"> </div>
<div class="crayon-main">
<table class="crayon-table">

<tr class="crayon-row">
<td class="crayon-nums " data-settings="show">
<div class="crayon-nums-content">
<div class="crayon-num" data-line="crayon-5510c05b00497489146914-1"> </div>
</div>
</td>
<td class="crayon-code">
<div class="crayon-pre">
<div id="crayon-5510c05b00497489146914-1" class="crayon-line"><sup><span class="crayon-r ">ping </span>4<span class="crayon-sy">.</span>2<span class="crayon-sy">.</span>2<span class="crayon-sy">.</span>2<span class="crayon-e "> -n</span>10</sup></div>
</div>
</td>
</tr>

</table>
</div>
</div>

[[Category: General Server Management Help]]

Importing SQL Files into PHPMyAdmin

2019-08-20T18:00:51Z

Alvin singco s: Created page with "<div style="text-align: center;"><span style="font-size: small;"><strong>This Guide Will Show You How To Import .SQL Files into PHPMYADMIN<br /><br /></strong>First, login to..."

<div style="text-align: center;"><span style="font-size: small;"><strong>This Guide Will Show You How To Import .SQL Files into PHPMYADMIN<br /><br /></strong>First, login to your PHPMYADMIN interface:<br /><br />
[[File:Logi1n.png|480px]]
<br /><br /><br /></span>Once logged in, you should see this screen:<br /><br /><br />
[[File:Loginscreen.png|480px]]
<br /><br /><br />After that, select the database name on the top left, and then click the import button:<br /><br /><br />
[[File:Importscreen.png|480px]]
<br /><br /><br /><br />After that, go find the .sql file you're looking to import:<br /><br /><br />
[[File:Uploaded file.png|480px]]
<br /><br /><br />NOTE: Some .SQL files have the following lines in them and need to be removed or edited<br /><br />"USE `essentialsmode`" or just "CREATE DATABASE IF NOT EXIST `nameofdb`"<br /><br />Change these to match the database name, or just delete them and save the file before importing.<br /><br /><br />Upon importing the .sql file, you should see a screen like this to confirm the upload was successful:<br /><br /><br />
[[File:End result.png|480px]]
<br /><br /><br /><br /><br />If you did not get a screen like this, please review you file for the problem that will be listed in the MYSQL import screen, or contact Citadel Servers personell for assistance.<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /></div>

[[Category: Game Panel Help]]

File:End result.png

2019-08-20T18:00:28Z

Alvin singco s:

File:Uploaded file.png

2019-08-20T17:59:20Z

Alvin singco s:

File:Importscreen.png

2019-08-20T17:58:15Z

Alvin singco s:

File:Loginscreen.png

2019-08-20T17:57:07Z

Alvin singco s:

File:Logi1n.png

2019-08-20T17:53:55Z

Alvin singco s:

Accessing and using PHPAdmin

2019-08-20T17:44:40Z

Alvin singco s: Created page with "<div style="text-align: left; margin-left: 240px;"><span style="font-size: small;">1. <span style="text-align: left;"><span style="text-align: left;">Login to your Game Contr..."

<div style="text-align: left; margin-left: 240px;"><span style="font-size: small;">1. <span style="text-align: left;"><span style="text-align: left;">Login to your Game Control Panel</span></span></span></div>
<div style="text-align: left; margin-left: 240px;"><span style="font-size: small;"><span style="text-align: left;"><span style="text-align: left;">2. Locate and Click MySQL Details to get your MySQL credentials</span></span></span></div>
<div style="text-align: left; margin-left: 240px;"><span style="font-size: small;"><span style="text-align: left;"><span style="text-align: left;">3. </span></span></span><span style="text-align: left;"><span style="text-align: left;"><span style="font-size: small;">Locate and click "MySQL Web Management" icon</span></span></span></div>
<div style="text-align: left; margin-left: 240px;"><span style="text-align: left;"><span style="text-align: left;"><span style="font-size: small;">4. Enter your login details, although it will automatically log you in.</span></span></span></div>
<div style="text-align: left; margin-left: 240px;"><span style="text-align: left;"><span style="text-align: left;"><span style="font-size: small;">5. This should take you to a phpMyAdmin dashboard where you can manage your databases.</span><br /></span></span><span style="text-align: left;"><br /><br /><br /></span></div>

[[Category: Game Panel Help]]

Category:Help

2019-08-20T17:42:20Z

Alvin singco s: /* Game Panel */

Category:Help

2019-08-20T17:41:44Z

Alvin singco s:

== Account Help ==

<DynamicPageList>
category = Citadel Servers - Account help
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

== cPanel Help ==

<DynamicPageList>
category = cPanel
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

== General Server Management ==

<DynamicPageList>
category = General Server Management Help
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

== Game Panel ==

<DynamicPageList>
category =
count = 500
order = ascending
addfirstcategorydate = true
</DynamicPageList>

Why is the Steam update window a white blank box?

2019-08-20T17:32:15Z

Alvin singco s: Created page with "<div style="text-align: center;">This is typically caused by an unsupported browser or an antivirus software blocking the window (we have confirmed BitDefender\Malaware bytes..."

<div style="text-align: center;">This is typically caused by an unsupported browser or an antivirus software blocking the window (we have confirmed BitDefender\Malaware bytes to cause issues with this).<br /><br /><strong>Solution:<br /></strong><br />We would suggest using an alternative device such as your Smart Phone or Tablet as these will not be effected by this issue. <br /><br />You can attempt to configure your anti-virus to allow our website, disabling it momintarly while you interact with our game control panel or to use an alternative antivirus.</div>

[[Category: General Server Management Help]]

My Sub Users Are Unable To See My Server On The Game Control Panel

2019-08-20T17:27:57Z

Alvin singco s:

<div style="text-align: center;"><br /><span style="font-size: small;">The following article will explain why your sub-users are unable to see your server in the game control panel and how to resolve this issue. For a guide on creating sub-users, please click [[Adding_Admins/Sub-Users_to_Your_Server_in_the_game_panel|here]].</span></div>
<div style="text-align: center;"><span style="font-size: small;"><strong> </strong></span></div>
<div style="text-align: left;"><span style="font-size: small;"><strong>Allowing sub-users to see your server</strong></span></div>
<div style="text-align: left; margin-left: 30px;"><span style="font-size: small;"> </span></div>
<div style="text-align: left; margin-left: 30px;"><span style="font-size: small;">The reason why your sub-users are unable to see your server is most likely because you forgot to tick the "Access to this service" box when creating the sub-user, or alternatively you haven't chosen the right service in the "Service" dropdown. The below image will show you what box I'm talking about.<br /></span><br /><span style="font-size: small;">
[[File:Subusererror1.png|480px]]
</span></div>
<div style="text-align: left; margin-left: 30px;"><br /><span style="font-size: small;"><em>This is the box that you need to make sure to tick.</em></span><br /><br /><span style="font-size: small;">To rectify this, edit your sub-user and navigate to the "Game/Voice Service Permissions" tab. Simply make sure that the <strong>"Access to this service"</strong> is ticked and then press "Save". Your sub-users should now be able to see your server in the game panel. You'll also want to make sure that you have chosen the right service in the "Service" dropdown.</span><br /><br /><span style="font-size: small;"><em><strong>Did the above information not work for you? Please contact our support via a ticket.</strong></em></span><span style="font-size: small;"><br /></span></div>

[[Category: General Server Management Help]]

My Sub Users Are Unable To See My Server On The Game Control Panel

2019-08-20T17:24:02Z

Alvin singco s: Created page with "<div style="text-align: center;"><br /><span style="font-size: small;">The following article will explain why your sub-users are unable to see your server in the game control..."

<div style="text-align: center;"><br /><span style="font-size: small;">The following article will explain why your sub-users are unable to see your server in the game control panel and how to resolve this issue. For a guide on creating sub-users, please click <a href="http://www.citadelservers.com/client/knowledgebase.php?action=displayarticle&id=4">here</a>.</span></div>
<div style="text-align: center;"><span style="font-size: small;"><strong> </strong></span></div>
<div style="text-align: left;"><span style="font-size: small;"><strong>Allowing sub-users to see your server</strong></span></div>
<div style="text-align: left; margin-left: 30px;"><span style="font-size: small;"> </span></div>
<div style="text-align: left; margin-left: 30px;"><span style="font-size: small;">The reason why your sub-users are unable to see your server is most likely because you forgot to tick the "Access to this service" box when creating the sub-user, or alternatively you haven't chosen the right service in the "Service" dropdown. The below image will show you what box I'm talking about.<br /></span><br /><span style="font-size: small;">
[[File:Subusererror1.png|480px]]
</span></div>
<div style="text-align: left; margin-left: 30px;"><br /><span style="font-size: small;"><em>This is the box that you need to make sure to tick.</em></span><br /><br /><span style="font-size: small;">To rectify this, edit your sub-user and navigate to the "Game/Voice Service Permissions" tab. Simply make sure that the <strong>"Access to this service"</strong> is ticked and then press "Save". Your sub-users should now be able to see your server in the game panel. You'll also want to make sure that you have chosen the right service in the "Service" dropdown.</span><br /><br /><span style="font-size: small;"><em><strong>Did the above information not work for you? Please contact our support via a ticket.</strong></em></span><span style="font-size: small;"><br /></span></div>

[[Category: General Server Management Help]]

How to Setup Scheduled Tasks For CS Game Panel

2019-08-20T17:04:41Z

Alvin singco s: Created page with "<div style="text-align: center;"><span style="font-size: small;">The following basic guide will show you how to access and setup Scheduled Tasks.</span></div> <p><br /><br />..."

<div style="text-align: center;"><span style="font-size: small;">The following basic guide will show you how to access and setup Scheduled Tasks.</span></div>
<p><br /><br /><span style="font-size: small;">1. Log into your game panel and click on 'Game Services' and select the game server you wish to use.<strong><br /><br /></strong>2. Select Scheduled Tasks from the top menu.</span><br /><br /><span style="font-size: small;">
[[File:Citadel-servers-tcadmin-scheduied-tasks.jpg|480px]]
</span><br /><br /><span style="font-size: small;"><strong><br /></strong>3. Click 'New' in the top left corner.</span><br /><br /><span style="font-size: small;">4. You will see the following image. </span><span style="font-size: small;">Steam Update and scheduled restart are simple and won't be covered in this article.</span><br /><br /><span style="font-size: small;">
[[File:Citadel-servers-tcadmin-scheduied-tasks scheduled restart.jpg|480px]]
</span><br /><br /><span style="font-size: small;">5. You will see the following image. </span><span style="font-size: small;">From here we can setup scheduled tasks to execute certain commands at exact intervals.</span><br /><br /><span style="font-size: small;">
[[File:Citadel-servers-tcadmin-scheduied-tasks setup-script-schedule.jpg|480px]]
</span><br /><br /><span style="font-size: small;">6. Put in your RCON password and set a name for your script. </span><span style="font-size: small;">We will be running a 'save-all' command for Minecraft.</span><br /><br /><span style="font-size: small;">
[[File:Citadel-servers-tcadmin-scheduied-tasks setup-script-schedule rcon.jpg|480px]]
</span><br /><br /><span style="font-size: small;">7. In the above image we have setup the task to run the command 'save-all' every 60 minutes.</span></p>

[[Category: General Server Management Help]]

File:Citadel-servers-tcadmin-scheduied-tasks setup-script-schedule rcon.jpg

2019-08-20T17:04:28Z

Alvin singco s:

File:Citadel-servers-tcadmin-scheduied-tasks setup-script-schedule.jpg

2019-08-20T17:04:01Z

Alvin singco s:

File:Citadel-servers-tcadmin-scheduied-tasks scheduled restart.jpg

2019-08-20T17:03:23Z

Alvin singco s:

File:Citadel-servers-tcadmin-scheduied-tasks.jpg

2019-08-20T17:02:12Z

Alvin singco s:

Clustered multiple Wurm servers

2019-08-20T16:57:32Z

Alvin singco s:

<div class="panel panel-default">
<div id="headingOne" class="panel-heading">
<h4 class="panel-title">Download SQLite DB Browser</h4>
</div>
<div id="collapseOne" class="panel-collapse collapse">
<div style="text-align: center;"><div class="panel-body">Download the [http://sqlitebrowser.org/ SQLite DataBase Browser] for your operating system. We recommend using the portable app version<br /><br />[[File:SQLiteDBBrowser.png|720px|center]]</div>
<div style="text-align: center;"><br /><br /><br />Install the SQLite DB browser and run it<br /><br /></div>
</div>
</div>
<div class="panel panel-default">
<div id="headingTwo" class="panel-heading">
<h4 class="panel-title">Open Database from sqlite\wurmslogin.db</h4>
</div>
<div id="collapseTwo" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">In the top toolbar select Open Database<br /><br />
<div>Navigate to the sqlite folder in your database folder<br /><br /></div>
<div>Open the wurmlogin.db database file</div>
<br /><br />[[File:OpenDatabaseWurmsLogin.png]]<br /><br /></div>
<div style="text-align: center;"> </div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingThree" class="panel-heading">
<h4 class="panel-title">Browse Data Tab</h4>
</div>
<div id="collapseThree" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;"><br />Select the second tab from the left, the Browse Data tab<br /><br />[[File:BrowseDataTab.png]]<br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingFour" class="panel-heading">
<h4 class="panel-title">SERVERS Table</h4>
</div>
<div id="collapseFour" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;"><br /><br />In the dropdown Table menu select SERVERS<br /><br />[[File:SERVERSTable.png]]<br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingFive" class="panel-heading">
<h4 class="panel-title">New Record in SERVERS Table</h4>
</div>
<div id="collapseFive" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;"><br /><br />At the right hand side of this select New Record<br /><br /></div>
<div style="text-align: center;">The first thing to do is choose a unique Server ID under SERVER for the new record<br /><br />[[File:NewRecordSERVERID.png]]
<br /><br /><br /></div>
<div style="text-align: center;"><br />Remember the Server IDs for the existing server and the new server. They will be needed in the following step and further steps!<br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingSix" class="panel-heading">
<h4 class="panel-title">SERVERNEIGHBOURS Table</h4>
</div>
<div id="collapseSix" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">In the Table dropdown menu now select SERVERNEIGHBOURS<br /><br />[[File:SERVERNEIGHBOURS.png]]<br /><br /><br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingSeven" class="panel-heading">
<h4 class="panel-title">Add NEIGHBOUR and DIRECTION to SERVERNEIGHBOURS SERVER</h4>
</div>
<div id="collapseSeven" class="panel-collapse collapse">
<div class="panel-body">In the SERVERNEIGHBOURS table the records for your servers and which other servers they neighbour are kept<br /><br /></div>
<div style="text-align: center;">For the existing server enter the Server ID of the new server in the NEIGHBOUR attribute<br /><br /></div>
<div style="text-align: center;">In the DIRECTION attribute specify the direction you want this new neighbouring server to be in relation to the existing server<br />Example: EAST (all caps)<br /><br />
[[File:SERVERNEIGHBOURSFilled.png]]
<br /><br /><br /><br /></div>
</div>
</div>
<div class="panel panel-default">
<div id="headingEight" class="panel-heading">
<h4 class="panel-title">File - Write Changes</h4>
</div>
<div id="collapseEight" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">Press Ctrl+S or select Write Changes in the File menu to save the changes to the database<br /><br />
[[File:WriteChanges.png]]<br /><br /><br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingNine" class="panel-heading">
<h4 class="panel-title">Upload Database with FTP Client or File Manager</h4>
</div>
<div id="collapseNine" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">With a prefered FTP client or File Manager upload the whole database to your server<br /><br />A related guide for FTP and File Managers can be found here:</div>
<div style="text-align: center;">[[FTP_Set-up_Guide|FTP]] or [[How_To_Use_The_File_Manager_in_the_game_panel|File Manager]] Guide<br /><br /><br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingTen" class="panel-heading">
<h4 class="panel-title">Configuration Files</h4>
</div>
<div id="collapseTen" class="panel-collapse collapse">
<div class="panel-body">In the Wurm Unlimited game Control Panel select Configuration Files</div>
<div style="text-align: center;"><br />[[File:ConfigurationFiles.png]]<br /><br /><br /><br /></div>
<div style="text-align: center;"> </div>
</div>
</div>
<div class="panel panel-default">
<div id="headingEleven" class="panel-heading">
<h4 class="panel-title">Configuration Editor for Service Settings</h4>
</div>
<div id="collapseEleven" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">In Configuration Files select Text Editor under Actions for the ServiceSettings<br /><br />[[File:ServerSettings.png]]
<br /><br /><br /><br />Copy down the Internal Server Port, External Server Port, RMI Port, and RMI Reg Port.<br /><br />[[File:ServerInfo.png]]
<br /><br /><br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingTwelve" class="panel-heading">
<h4 class="panel-title">Neighbor Settings</h4>
</div>
<div id="collapseTwelve" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">Return to Configuration Files but now select Configuration Editor under Actions for the ServiceSettings.<br /><br />Find the corresponding Neighbour Settings for the DIRECTION you chose in the SERVERNEIGHBOURS Table<br />Example: Eastern Neighbor Settings<br /><br />[[File:ServiceSettingsConfigurationEditor.png]]<br /><br /><br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingThirteen" class="panel-heading">
<h4 class="panel-title">Enter Server Information</h4>
</div>
<div id="collapseThirteen" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">Enter the Server ID you chose for the new server from the SERVER table in the "Server ID of Eastern server:" field</div>
<div style="text-align: center;"><br />Enter the server name and the relevant port information of your second server into the rest of the Settings fields<br /><br /><br />
[[File:ServiceSettingsConfigurationEditorFilled.png]]</div>
<div style="text-align: center;"><br /><br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingFourteen" class="panel-heading">
<h4 class="panel-title">Update Database</h4>
</div>
<div id="collapseFourteen" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">Click Save and return to the Wurm Unlimited game Control Panel. Click the "Update Database (Click before Starting Server)" option<br /><br />
[[File:UpdateDatabase.png]]<br /><br /><br /><br /><br /></div>
</div>
</div>
</div>
<div class="panel panel-default">
<div id="headingFifteen" class="panel-heading">
<h4 class="panel-title">Configuration File</h4>
</div>
<div id="collapseFifteen" class="panel-collapse collapse">
<div class="panel-body">
<div style="text-align: center;">Find the folder of your Login server<br /><br /></div>
<div style="text-align: center;">Open the directory of the map you're playing (Example: Creative)<br /><br /></div>
<div style="text-align: center;">Open the Wurm.ini with notepad<br /><br /></div>
<div style="text-align: center;">Find the line named "USE_INCOMING_RMI=false" with Ctrl+F<br /><br /></div>
<div style="text-align: center;">Change it to "USE_INCOMING_RMI=true"<br /><br /></div>
<div style="text-align: center;">If the "USE_INCOMING_RMI=false" line does not exist in the file then add it<br /><br />
[[File:Wurmpedia.png]]</div>
</div>
</div>
</div>
</div>
</div>

[[Category:Wurm Unlimited]] [[Category:Wurm Unlimited Server Help Articles]]

How To Use The File Manager in the game panel

2019-08-20T16:56:04Z

Alvin singco s: Created page with "<div style="text-align: center;"><br />In this article, we will cover basic use of the "File Manager" in the Citadel Servers Game Panel.<br /><br />We do recommend uploading v..."

<div style="text-align: center;"><br />In this article, we will cover basic use of the "File Manager" in the Citadel Servers Game Panel.<br /><br />We do recommend uploading via FTP instead of the file manager.<br /><br /><br /></div>
<div style="text-align: center;"><span style="font-size: small;"><strong>How To Open The File</strong></span><span style="font-size: small;"><strong> Manager:</strong></span><strong><br /><br /><br /></strong>First thing is first, we need to login and access the Game Panel:<br /><br />
[[File:Front.png|480px]]
<br /><br />Once logged in, select the "File Manager" tool to open the File Manager interface:<br /><br /><br />
[[File:Filemanager1.png|480px]]
<br />File Manager<br /><br />You should see a window like this:<br /><br />
[[File:Filemanager1.png|480px]]
<br /><br />This is the File Manager, here you can rename, download, upload, delete files, and other assorted functions.<br /><br /><br /><br /><strong><span style="font-size: small;">How To Download A File In The File</span><span style="font-size: small;"> Manager:</span></strong><span style="font-size: small;"><br /><br /></span><br />Downloading a file from here is rather easy, all one needs to do is click the little globe icon, and save the file to their computer.<br /><br />
[[File:Download1.png|480px]]
<br /><br />
[[File:Download2.png|480px]]
<br /><br /><br /><span style="font-size: small;"><strong>How To Upload A File In The File</strong><strong> Manager:</strong></span><strong><br /><br /></strong><br />Uploading a file in this interface is also rather easy.<br /><br />To do this, select the "Upload" button when you're in the directory you want.<br /><br />Then select the file you want to upload from your computer.<br /><br />After that, allow it to upload, and you're done!<br /><br /><br />
[[File:Upload1.png|480px]]
<br /><br />
[[File:Upload2.png|480px]]
<br /><br />
[[File:Upload3.png|480px]]
<br /><br />
[[File:Upload4.png|480px]]
<br /><br /><br /><span style="font-size: small;"><strong>How To Zip/Unzip A File In The File</strong> <strong>Manager:</strong><br /><br /><br /></span>Compressing and uncompressing files is also rather easy, simply select "Extract" on the zip file, and it'll decompress it for you.<br /><br />To compress a file, tick the checkbox by the file you want to compress, and it'll make a zip file for it.<br /><br /><br /><strong>Unzipping A File:</strong><br /><br />
[[File:Extract1.png|480px]]
<br /><br />
[[File:Extract2.png|480px]]
<br /><br /><br /><br /><br /><br /><strong>Zipping A File:</strong><br /><br />
[[File:Compress1.png|480px]]
<br /><br />
[[File:Compress2.png|480px]]
<br /><br />
[[File:Extract1.png|480px]]
<br /><br /><br /><br /><strong><span style="font-size: small;">How To Rename A File/Folder In The File</span> <span style="font-size: small;">Manager:</span><br /><br /></strong><br />Renaming files/folders is as simple as clicking the rename icon, typing in the new name(with file extension((.txt .zip etc))), and clicking "OK".<br /><br />
[[File:Rename1.png|480px]]
</div>
<div style="text-align: center;"><br />
[[File:Rename2.png|480px]]
<br />
[[File:Rename3.png|480px]]
<br /><br /></div>
<div style="text-align: center;"><br />There's all of the basic need to know information on the functions of the File Manager tool.<br /><br />For an easier time managing the files on your server, try using an FTP Client like "FileZilla" it's free and easy to use.<br /><br /></div>
<div style="text-align: center;">Here is a link to the guide on using FTP: [[FTP_Set-up_Guide]] Here is a link to FileZilla: https://filezilla-project.org/</div>

[[Category: General Server Management Help]]

File:Rename3.png

2019-08-20T16:54:23Z

Alvin singco s:

File:Rename2.png

2019-08-20T16:53:58Z

Alvin singco s:

File:Rename1.png

2019-08-20T16:53:31Z

Alvin singco s: